NCAM 1.1 GI S 8120 HD

[CHILA-OM]

NCam 9.0-r0 Emu -r999
-[powervu] Added support for hash mode 30
-insert hd03 and hd04 atr
-[dvbapi + powervu] Properly set the descrambler mode for CSA
(When watching a DES powervu channel, switching back to CSA channels required a reboot on some receivers. Other more resilient receivers just threw an error(ioctl(CA_SET_DESCR_MODE): Invalid argument), but continued to work. This was described as a bug of these receivers, but in fact it was a bug of oscam-emu. The correct mode for the CSA algorithm is CBC and not ECB! Thanks to all who helped)

[CHILA-OM]

NCam 9.1-r0 Emu -r999
-Improvement the emu
-[nemu] Fixed potential deadlock in powervu emm handling
(When the key DB contains no powervu keys, the powervu_get_hexserials() retuns 0 and the mutex in emu_get_pvu_emm_filter() is not released)

[CHILA-OM]

NCam 9.2-r0 Emu -r999
-Improvement the emu
-Fixes detecte reader and file-keys of constant.cw
-[powervu] Added support for various hash modes
(This includes hash modes 0, 0x0B, 0x0C, 0x0D, 0x0E and greater than 0x27)

[CHILA-OM]

NCam 9.3-r0 Emu -r999
-[powervu] Added support for hash mode 31

[Rusllan]

9.4 Ncam.sh4

[ADmB]

Последняя версия Нкам 9.7.

[ADmB]

Версия 9.8.

[ADmB]

Версия 9.9
(02-05-2019-[nemu] Pass complete rdr structure to emu_process_ecm()(Also re-ordered arguments in powervu_ecm())-remove duplicate debug dump of er->ecm-fix bug in disablecrccws_only_for also in cacheex-general disable checksum correction code optimization-[powervu] Added new method for matching ECM and EMM keys(Read the wiki for instructions on how to use it: PowerVU config · oscam-emu/oscam-patched Wiki · GitHub method is based on enigma2 namespace and it is only available for enigma2 and Tvheadend/VDR software for PC. Also, it does not work with stream relay)-[dvbapi] Fix for stapi, coolapi, etс)

[Rusllan]

Ncam 10.2 compiled and patched READ

-fix MODULE CONSTCW
-fix webif save issue with high var count

[CHILA-OM]

-[dvbapi] Always regard stream_type 0x81 as audio (ac3) without looking for the ac3_descriptor
*This fixes some not ATSC complaint channels reported with no sound.
-HD+ HD05 Card support (tnx pehedima for patch!)
-NDS DES/3DES Overcrypt support
-fix bug for wrong decoded classD3 CMD's
-improved Sky DE/CH/AT V14/V15 payload log output
[streamserver] Synced descriptor parsing code with the dvbapi
*This should fix no AC-3 audio on some PowerVu channels.

[CHILA-OM]

-[dvbapi] Always regard stream_type 0x81 as audio (ac3) without looking for the ac3_descriptor
*This fixes some not ATSC complaint channels reported with no sound.
-HD+ HD05 Card support (tnx pehedima for patch!)
-NDS DES/3DES Overcrypt support
-fix bug for wrong decoded classD3 CMD's
-improved Sky DE/CH/AT V14/V15 payload log output
-[streamserver] Synced descriptor parsing code with the dvbapi
*This should fix no AC-3 audio on some PowerVu channels.
-[dvbapi] add ecm.info gbox style
-fix ecmfmt g,j parameters
-cak7 - fix caid 0000 and all other known issues
-[gbx] try fix ecm and cw messages
-[gbx] fix ccc->gbox reshare
-[gbx] add caidtab as reshare setting
-[gbx] - more generalized routing info in cw msg

[CHILA-OM]

-fix HD03/05 CMD Overflow
-patch provided
-rework code ref gbox_maxecmsend
-clean up some ecm stuff

******* (Thank you My friend fegol to Help)

-Add more Bin cam for Android devices. Such assoftwrae for (KitKat, Lollipop, Marshmallow)
-Add support also Android (stapi) device.
-Add more option for Cccam. Nwo you can use (CCcam.cfg) file
*Just send file to /etc/tuxbox/config and add then add this reader to ncam.server

################# CCcam with CCcam.cfg ###################

[reader]
label = Server_1
protocol = cccam
= device = /etc/tuxbox/config/CCcam.cfg
inactivitytimeout = -1
reconnecttimeout = 12
group = 3
cccversion = 2.0.11
ccckeepalive = 1
cccmaxhops = 2 # dont use higher than 3 !!!
disablecrccws = 1
cccwantemu = 1

[CHILA-OM]

-introduced sharing instability side effect
-fix detect cx-aio on reinit userdb
-fix global cacheex_ecm_filter/_aio selection now work properly (bug: selectend _aio values for non patched peers)
-Add cx-aio-version detection @cccam-proto
-Add web/help option http://IP_your_device:8181/help

[CHILA-OM]

-Add support powervu for android device ## New feature
-Add wi_socket_id option ## New option
-Add repetitions_forced option to enable/disable CCcam.cfg work ## New option
-Correction some codes
-Newcamd/NCam Stealth mode
-Some edit with ncam webinterface(http://IP-device:8181/readers.html)
-Some cusomize for MgCamd
-Skip CWs checksum updated
-android cccam connection fixed
*(built without libcrypto: (cccam) cccam(r): login failed, usr/pwd invalid)
-updated cx-aio-v09.2.5
-Try to compress bin files by UPX with scripts method (Beta TEST)

[CHILA-OM]

-[powervu] Fixed emm algo
-Add emu BISS2 (Beta Test)
-repeat to ask all gbox readers again during fallback time (Thank's chimpie232)

[CHILA-OM]

-New (Exclusive) feature on Ncam
*(Searching, Fetching, Reading and running Free C: line server from net)
-Small fix for (lg) detection
-Fixed unode_id (...)
-Fix prevent buffer overflow
-Fix cl->reader->cacheex.maxhop_lg > max never used
-Need PIN on 092F and 091F caid's fixed
-Updated aio
-patch for common bugs reported by scan-build
-fix typos move debug logoutput to debug
-small fix for ecm-whitelist
-Updated: Android stapi, CW type
-small correction (do not have the same user and pass)

[CHILA-OM]

-A lot of Fixes
-change in CCcam.cfg free servers name

[CHILA-OM]

-Update URL for Free Servers
-[powervu] Fixed emm algo
-Add emu BISS2 (Best Test)
-repeat to ask all gbox readers again during fallback time (Thank's chimpie232)
-Fix: read the SoftCam.Key file in the url and the SoftCam.Key file in the configuration folder
-Fix: cccam cfg path
-Add TotalTV Serbia (0911) ATR to reader-videoguard-common
-Adding CAID 0961 & CAID 09BB Sky Uk and Airtel India

[CHILA-OM]

1. -update URL (25.02.2021)”
2. -Fixed SoftCam.Key (url) cut file name”
3. -fixind srvid on Radegast Module by Adding srvid because ECM contains0000″
4. -webif-cacheex-client.reader-description-fix v1″
5. (add else conditions)”
6. -[biss] Changed tsid-onid combo validation”
7. -[gbx] – add dynamic card update/exchange”
8. * rearrange hello scheme
9. * add peer specific ccc reshare ident filter
10. * fix major bug in send hello msg
11. * correct checkcode calculation
12. * change some default settings
13. * add optional send msg Here? to selected peers”
14. -Fix need pin for 0961″
15. (reader) 0961_sky [videoguard2] classD3 ins54: no cw –> Card needs pin)”
16. -[dvbapi] Updated extension descriptor tags”
17. (In accordance with ETSI EN 300 468 V1.16.1, table 109.)”
18. -[powervu] Added some missing hash modes”
19. -[streamserver] Synced extension descriptor tags with the dvbapi code”

Сам бінарик та файли конфіг.(залишив лишень основні, трішки відредагувавав, починаючи з v11.6 додали файл ncam.fs так і не знайшов толкової інфо.для чого він) витягнув з плагіна.

[CHILA-OM]

В архівах самі бінарики.