Обсуждение AMIKO SHD 8900 ALIEN / GI S8120 HD. Часть 1

[ffgk]

Сообщение от sgrey

а что говорит по этому поводу команда (-ы)

dmesg
cat /proc/partitions

Спасибо за ответ. Честно, я в Linux не силен, поэтому буду благодарен если поможете разобраться.
Вот что говорит dmesg:

<4>Mount-cache hash table entries: 512
<4>CPU: STx7111
<6>NET: Registered protocol family 16
<6>fulanid: 09:00:0A:00:00:2A:C6
<6>Generic PHY: Registered new driver
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Time: SuperH clocksource has been installed.
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>TCP reno registered
<4>Freeing initrd memory: 2517k freed
<6>NTFS driver 2.1.28 [Flags: R/W].
<6>JFFS2 version 2.2. (NAND) ┬й 2001-2006 Red Hat, Inc.
<4>fuse init (API version 7.8)
<6>JFS: nTxBlock = 786, nTxLock = 6291
<4>yaffs Oct 17 2011 14:10:37 Installing.
<6>io scheduler noop registered
<6>io scheduler anticipatory registered (default)
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>STMicroelectronics ASC driver initialized
<6>stasc.0: ttyAS0 at MMIO 0xfd032000 (irq = 121) is a stasc
<6>stasc.1: ttyAS1 at MMIO 0xfd033000 (irq = 120) is a stasc
<4>RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize
<6>loop: module loaded
<7>stmmacphy_dvr_probe: added phy for bus 0
<7>STMMAC driver:
<4>     platform registration... <7>done!
<6>     GMAC - user ID: 0x10, Synopsys ID: 0x33
<4>     no valid MAC address; please, set using ifconfig or nwhwconfig!
<6>     eth0 - (dev. name: stmmaceth - id: 0, IRQ #133
<4>     IO base addr: 0xfd110000)
<7>     Registering MDIO bus (id: 0)...
<7>calling mdiobus_register
<7>stmmac_mdio_reset: called!
<7>stmmac_mdio_reset: calling phy_reset
<7>mdiobus_register: found PHY and assigning IRQ -1
<6>STMMAC MII Bus: probed
<7>calling mdiobus_register done
<6>eth0: PHY ID 00008201 at 2 IRQ -1 (0:02) active
<7>     MDIO bus registered!
<6>Davicom DM9161E: Registered new driver
<6>Davicom DM9161A: Registered new driver
<6>Davicom DM9131: Registered new driver
<6>STe100p: Registered new driver
<6>STe101p: Registered new driver
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<6>PPPoL2TP kernel driver, V1.0
<6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>CSLIP: code copyright 1989 Regents of the University of California.
<6>SLIP linefill/keepalive option.
<6>pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
<6>usbcore: registered new interface driver pegasus
<6>usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver zaurus
<6>nwhw_config: (eth0) setting mac address: 24:00:0A:00:2A:C6
<5>physmap platform flash device: 00800000 at 00000000
<6>physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
<4> Amd/Fujitsu Extended Query Table at 0x0040
<5>number of CFI chips: 1
<5>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
<5>RedBoot partition parsing not available
<5>Using physmap partition information
<5>Creating 3 MTD partitions on "physmap-flash":
<5>0x00000000-0x00080000 : "Boot firmware"
<4>first erase region 0 for slave @ 0
<5>0x00080000-0x00780000 : "Kernel"
<4>first erase region 1 for slave @ 524288
<5>0x00780000-0x00800000 : "Reserve"
<4>first erase region 1 for slave @ 7864320
<6>NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
<6>Scanning device for bad blocks
<5>Creating 4 MTD partitions on "gen_nand.1":
<5>0x00000000-0x00800000 : "Spark kernel"
<5>0x00800000-0x18000000 : "Spark Userfs"
<5>0x18000000-0x18800000 : "E2 kernel"
<5>0x18800000-0x1ff00000 : "E2 Userfs"
<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
<6>stm-ehci stm-ehci.0: st-ehci
<6>stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
<6>stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
<6>stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>stm-ohci stm-ohci.0: stm-ohci
<6>stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
<6>stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
<6>usbcore: registered new interface driver usbserial_generic
<6>drivers/usb/serial/usb-serial.c: USB Serial Driver core
<6>mice: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<6>Linux telephony interface: v1.00
<6>usbcore: registered new interface driver usbhid
<6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
<4>STMicroelectronics - Coprocessors st231 Init
<4>st-coprocessor-0: No RAM reserved
<4>st231.0 Coprocessor -------------------------------------------
<4>    not configured!
<4>---------------------------------------------------------------
<4>st-coprocessor-1: No RAM reserved
<4>st231.1 Coprocessor -------------------------------------------
<4>    not configured!
<4>---------------------------------------------------------------
<6>stm_rng hardware driver 1.0 configured
<5>heartbeat: version 0.1.1 loaded
<6>TCP cubic registered
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<6>ieee80211: 802.11 data/management/control stack, git-1.1.13
<6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
<7>ieee80211_crypt: registered algorithm 'NULL'
<7>ieee80211_crypt: registered algorithm 'WEP'
<7>ieee80211_crypt: registered algorithm 'CCMP'
<7>ieee80211_crypt: registered algorithm 'TKIP'
<7>stmmac_init_phy:  trying to attach to 0:02
<7>stmmac_init_phy:  eth0: attached to PHY (UID 0x8201) Link = 1
<6>stmmac_timer: TMU2 Timer ON (freq 256Hz)
<4>IP-Config: Complete:
<4>      device=eth0, addr=192.168.0.69, mask=255.255.255.0, gw=192.168.0.1,
<4>     host=lh, domain=, nis-domain=(none),
<4>     bootserver=192.168.0.119, rootserver=192.168.0.119, rootpath=
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<4>Freeing unused kernel memory: 136k freed
<6>yaffs: dev is 32505860 name is "mtdblock4"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.4, "mtdblock4"
<4>yaffs_read_super: isCheckpointed 0
<4>stos_core: module license 'ST Microelectronics' taints kernel.
<1>Load module stos_core [?]            by insmod (pid 474)
<1>Load module stsys_ioctl [252]                by insmod (pid 476)
<6>LXLOAD(video1)       : LX loaded => Base=0x40000000 - Last=0x4010ca2c - Size=1100332
<6>LXLOAD(audio1)       : LX loaded => Base=0x40400000 - Last=0x40583e34 - Size=1588788
<1>Load module stevt_core [?]           by insmod (pid 526)
<1>Load module stclock_core [252]               by insmod (pid 526)
<1>Load module stclkrv_core [?]         by insmod (pid 526)
<1>Load module stpower_core [251]               by insmod (pid 526)
<1>Load module stfdma_core [250]                by insmod (pid 526)
<1>Load module stuart_core [249]                by insmod (pid 526)
<1>Load module stmerge_core [?]         by insmod (pid 526)
<1>Load module stavmem_core [?]         by insmod (pid 526)
<4>    Info> Number Of Partitions = 1
<4>    Info> Maximum number of memory blocks = 300
<1>Load module stbuffer_core [?]                by insmod (pid 526)
<1>Load module stinject_core [?]                by insmod (pid 526)
<1>Load module sti2c_core [?]           by insmod (pid 526)
<1>Load module stpio_core [?]           by insmod (pid 526)
<1>Load module stpwm_core [?]           by insmod (pid 526)
<1>Load module stdenc_core [?]          by insmod (pid 526)
<1>Load module stlayer_core [?]         by insmod (pid 526)
<1>Load module stvout_core [?]          by insmod (pid 526)
<1>Load module stvtg_core [?]           by insmod (pid 526)
<1>Load module stvid_core [?]           by insmod (pid 526)
<1>Load module stvin_core [?]           by insmod (pid 526)
<1>Load module stos_core [?]            by insmod (pid 526)
<1>Load module stvmix_core [?]          by insmod (pid 526)
<1>Load module stgxobj_core [?]         by insmod (pid 526)
<1>Load module staudlx_core [248]               by insmod (pid 526)
<1>Load module stcc_core [?]            by insmod (pid 526)
<1>Load module stttx_core [?]           by insmod (pid 526)
<1>Load module stvbi_core [?]           by insmod (pid 526)
<1>Load module stsubt_core [247]                by insmod (pid 526)
<1>Load module stsmart_core [245]               by insmod (pid 526)
<1>Load module sthdmi_core [?]          by insmod (pid 526)
<1>Load module stnet_core [?]           by insmod (pid 526)
<1>Load module stkeyscn_core [?]                by insmod (pid 526)
<1>Load module stpti4_core [?]          by insmod (pid 526)
<6>Tuxera NTFS driver 3010.9.16 [Flags: R/W MODULE].
<1>Load module stfrontend_core [244]    by insmod (pid 526)
<1>Load module ywca_module [190]                by insmod (pid 526)
<7>DVB: register adapter0/demux0 @ minor: 4 (0x04)
<7>DVB: register adapter0/dvr0 @ minor: 5 (0x05)
<7>DVB: register adapter0/demux1 @ minor: 20 (0x14)
<7>DVB: register adapter0/dvr1 @ minor: 21 (0x15)
<7>DVB: register adapter0/demux2 @ minor: 36 (0x24)
<7>DVB: register adapter0/dvr2 @ minor: 37 (0x25)
<7>DVB: register adapter0/demux3 @ minor: 52 (0x34)
<7>DVB: register adapter0/dvr3 @ minor: 53 (0x35)
<7>DVB: register adapter0/ca0 @ minor: 6 (0x06)
<7>DVB: register adapter0/ca1 @ minor: 22 (0x16)
<7>DVB: register adapter0/ca2 @ minor: 38 (0x26)
<7>DVB: register adapter0/ca3 @ minor: 54 (0x36)
<7>DVB: register adapter0/swap0 @ minor: 15 (0x0f)
<1>Load module smart_module [169]               by insmod (pid 526)
<1>Load module stevt_ioctl [243]                by insmod (pid 526)
<1>Load module stclkrv_ioctl [241]              by insmod (pid 526)
<1>Load module stpower_ioctl [240]              by insmod (pid 526)
<1>Load module stfdma_ioctl [239]               by insmod (pid 526)
<1>Load module stuart_ioctl [238]               by insmod (pid 526)
<1>Load module stmerge_ioctl [237]              by insmod (pid 526)
<1>Load module stavmem_ioctl [236]              by insmod (pid 526)
<1>Load module stbuffer_ioctl [235]     by insmod (pid 526)
<1>Load module stinject_ioctl [234]     by insmod (pid 526)
<1>Load module sti2c_ioctl [233]                by insmod (pid 526)
<1>Load module stspi_ioctl [232]                by insmod (pid 526)
<1>Load module stpio_ioctl [230]                by insmod (pid 526)
<1>Load module stpwm_ioctl [229]                by insmod (pid 526)
<1>Load module stdenc_ioctl [228]               by insmod (pid 526)
<1>Load module stlayer_ioctl [227]              by insmod (pid 526)
<1>Load module stvout_ioctl [226]               by insmod (pid 526)
<1>Load module stvtg_ioctl [225]                by insmod (pid 526)
<1>Load module stvid_ioctl [224]                by insmod (pid 526)
<1>Load module stvin_ioctl [223]                by insmod (pid 526)
<1>Load module stvmix_ioctl [222]               by insmod (pid 526)
<1>Load module stgxobj_ioctl [221]              by insmod (pid 526)
<1>Load module stcc_ioctl [219]         by insmod (pid 526)
<1>Load module stttx_ioctl [218]                by insmod (pid 526)
<1>Load module stvbi_ioctl [217]                by insmod (pid 526)
<1>Load module stsubt_ioctl [215]               by insmod (pid 526)
<1>Load module stsmart_ioctl [213]              by insmod (pid 526)
<1>Load module sthdmi_ioctl [212]               by insmod (pid 526)
<1>Load module stsys_ioctl [211]                by insmod (pid 526)
<1>Load module stnet_ioctl [210]                by insmod (pid 526)
<1>Load module stkeyscn_ioctl [209]     by insmod (pid 526)
<1>Load module stpti4_ioctl [208]               by insmod (pid 526)
<1>Load module stfrontend_ioctl [207]   by insmod (pid 526)
<6>usbcore: registered new interface driver rt73
<4>rtusb init --->
<6>usbcore: registered new interface driver rt2870
<4>
<4> _____     ____    _    ____
<4>|__  /   _|  _ \  / \  / ___|
<4>  / / | | | | | |/ _ \ \___ \
<4> / /| |_| | |_| / ___ \ ___) |
<4>/____\__, |____/_/   \_\____/
<4>     |___/
<5>Open1211 - version Sun Jun 20 06:30:21 CST 2010
<6>usbcore: registered new interface driver zd1211b
<4>
<4> _____     ____    _    ____
<4>|__  /   _|  _ \  / \  / ___|
<4>  / / | | | | | |/ _ \ \___ \
<4> / /| |_| | |_| / ___ \ ___) |
<4>/____\__, |____/_/   \_\____/
<4>     |___/
<5>Open1211 - version Sun Jun 20 06:30:21 CST 2010
<6>usbcore: registered new interface driver zd1211
<6>usbcore: registered new interface driver r871x_usb_drv
<4>rtw driver version=v2.0.1324.20110126
<6>usbcore: registered new interface driver rtw_usb_drv
<4>rtusb init rt5370 --->
<6>usbcore: registered new interface driver rt5370
<6>drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver option
<6>drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
<6>drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
<6>usbcore: registered new interface driver pl2303
<6>drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
<6>input: ywvinput as /class/input/input0
<6>usb 1-1: new high speed USB device using stm-ehci and address 2
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>scsi0 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<5>scsi 0:0:0:0: CD-ROM            Hitachi  SW_VCD                PQ: 0 ANSI: 2 CCS
<7>usb-storage: device scan complete
<6>usb 1-1: USB disconnect, address 2
<3>hub 1-0:1.0: over-current change on port 1
<6>usb 1-1: new high speed USB device using stm-ehci and address 3
<6>usb 1-1: configuration #1 chosen from 1 choice
<6>hub 1-1:1.0: USB hub found
<6>hub 1-1:1.0: 4 ports detected
<6>usb 1-1.2: new high speed USB device using stm-ehci and address 4
<6>usb 1-1.2: configuration #1 chosen from 1 choice
<6>usb 1-1.1: new high speed USB device using stm-ehci and address 5
<6>usb 1-1.1: configuration #1 chosen from 1 choice
<6>scsi1 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 5
<7>usb-storage: waiting for device to settle before scanning
<5>scsi 1:0:0:0: CD-ROM            Hitachi  SW_VCD                PQ: 0 ANSI: 2 CCS
<7>usb-storage: device scan complete
<4>=======pAd->MACVersion = 0x3071021c
<4>load firmware successful=============
<4>0x1300 = 00064300
<4>=======pAd->MACVersion = 0x3071021c
<4>load firmware successful=============
<4>0x1300 = 00064300
[root@stlinux]#