Обсуждение и Настройка ASUS WL500хх и DLink DIR 320

Переключил в USB0. Ничего
log
Jan 1 00:00:13 OpenWrt user.warn kernel: diag: Detected 'D-Link DIR-320'
Jan 1 00:00:13 OpenWrt user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Jan 1 00:00:13 OpenWrt user.info kernel: b44: eth0: Flow control is off for TX and off for RX.
Jan 1 00:00:13 OpenWrt user.info kernel: roboswitch: Probing device eth0: found a 5325! It's a 5350.
Jan 1 00:00:13 OpenWrt user.info kernel: b44: eth0: powering down PHY
Jan 1 00:00:13 OpenWrt user.info kernel: mini_fo: using base directory: /
Jan 1 00:00:13 OpenWrt user.info kernel: mini_fo: using storage directory: /jffs
Jan 1 00:00:16 OpenWrt user.info kernel: b44: eth0: Link is up at 100 Mbps, full duplex.
Jan 1 00:00:16 OpenWrt user.info kernel: b44: eth0: Flow control is off for TX and off for RX.
Jan 1 00:00:17 OpenWrt user.info kernel: device eth0.0 entered promiscuous mode
Jan 1 00:00:17 OpenWrt user.info kernel: device eth0 entered promiscuous mode
Jan 1 00:00:17 OpenWrt user.info kernel: br-lan: port 1(eth0.0) entering forwarding state
Jan 1 00:00:19 OpenWrt user.info kernel: HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
Jan 1 00:00:19 OpenWrt user.info kernel: N_HDLC line discipline registered.
Jan 1 00:00:20 OpenWrt user.info kernel: cfg80211: Using static regulatory domain info
Jan 1 00:00:20 OpenWrt user.info kernel: cfg80211: Regulatory domain: US
Jan 1 00:00:20 OpenWrt user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 00:00:20 OpenWrt user.info kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Jan 1 00:00:20 OpenWrt user.info kernel: (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 1 00:00:20 OpenWrt user.info kernel: (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 1 00:00:20 OpenWrt user.info kernel: (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 1 00:00:20 OpenWrt user.info kernel: (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jan 1 00:00:20 OpenWrt user.info kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Jan 1 00:00:20 OpenWrt user.info kernel: cfg80211: Calling CRDA for country: US
Jan 1 00:00:22 OpenWrt user.info kernel: cfg80211: Regulatory domain changed to country: US
Jan 1 00:00:22 OpenWrt user.info kernel: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 1 00:00:22 OpenWrt user.info kernel: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Jan 1 00:00:22 OpenWrt user.info kernel: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Jan 1 00:00:22 OpenWrt user.info kernel: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:22 OpenWrt user.info kernel: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:22 OpenWrt user.info kernel: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:22 OpenWrt user.info kernel: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Jan 1 00:00:23 OpenWrt user.notice kernel: SCSI subsystem initialized
Jan 1 00:00:24 OpenWrt user.info kernel: usbcore: registered new interface driver usbfs
Jan 1 00:00:24 OpenWrt user.info kernel: usbcore: registered new interface driver hub
Jan 1 00:00:24 OpenWrt user.info kernel: usbcore: registered new device driver usb
Jan 1 00:00:25 OpenWrt user.info kernel: b43-phy0: Broadcom 5354 WLAN found (core revision 13)
Jan 1 00:00:25 OpenWrt user.debug kernel: phy0: Selected rate control algorithm 'minstrel'
Jan 1 00:00:25 OpenWrt user.info kernel: Registered led device: b43-phy0::tx
Jan 1 00:00:25 OpenWrt user.info kernel: Registered led device: b43-phy0::rx
Jan 1 00:00:25 OpenWrt user.info kernel: Registered led device: b43-phy0::radio
Jan 1 00:00:25 OpenWrt user.info kernel: Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
Jan 1 00:00:27 OpenWrt user.info kernel: PPP generic driver version 2.4.2
Jan 1 00:00:27 OpenWrt user.info kernel: tun: Universal TUN/TAP device driver, 1.6
Jan 1 00:00:27 OpenWrt user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan 1 00:00:27 OpenWrt user.info kernel: PPP MPPE Compression module registered
Jan 1 00:00:28 OpenWrt user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 1 00:00:28 OpenWrt user.info kernel: NET: Registered protocol family 24
Jan 1 00:00:29 OpenWrt user.warn kernel: Driver 'sd' needs updating - please use bus_type methods
Jan 1 00:00:29 OpenWrt user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 00:00:29 OpenWrt user.warn kernel: nf_conntrack version 0.5.0 (512 buckets, 2048 max)
Jan 1 00:00:31 OpenWrt user.warn kernel: nf_conntrack_rtsp v0.6.21 loading
Jan 1 00:00:31 OpenWrt user.warn kernel: nf_nat_rtsp v0.6.21 loading
Jan 1 00:00:31 OpenWrt user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 1 00:00:31 OpenWrt user.info kernel: ohci_hcd ssb0:1: SSB OHCI Controller
Jan 1 00:00:31 OpenWrt user.info kernel: ohci_hcd ssb0:1: new USB bus registered, assigned bus number 1
Jan 1 00:00:31 OpenWrt user.info kernel: ohci_hcd ssb0:1: irq 6, io mem 0x18003000
Jan 1 00:00:31 OpenWrt user.info kernel: usb usb1: configuration #1 chosen from 1 choice
Jan 1 00:00:31 OpenWrt user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 00:00:31 OpenWrt user.info kernel: hub 1-0:1.0: 2 ports detected
Jan 1 00:00:31 OpenWrt user.info kernel: ohci_hcd ssb0:1: SSB EHCI Controller
Jan 1 00:00:31 OpenWrt user.info kernel: ohci_hcd ssb0:1: new USB bus registered, assigned bus number 2
Jan 1 00:00:32 OpenWrt user.info kernel: ohci_hcd ssb0:1: irq 6, io mem 0x18003800
Jan 1 00:00:32 OpenWrt user.info kernel: ohci_hcd ssb0:1: USB 0.0 started, EHCI 1.00
Jan 1 00:00:32 OpenWrt user.info kernel: usb usb2: configuration #1 chosen from 1 choice
Jan 1 00:00:32 OpenWrt user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 00:00:32 OpenWrt user.info kernel: hub 2-0:1.0: 2 ports detected
Jan 1 00:00:32 OpenWrt user.info kernel: usbcore: registered new interface driver usblp
Jan 1 00:00:32 OpenWrt user.err kernel: hub 2-0:1.0: unable to enumerate USB device on port 1
Jan 1 02:00:32 OpenWrt user.info kernel: usb 1-1: new full speed USB device using ohci_hcd and address 2
Jan 1 02:00:32 OpenWrt user.info kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan 1 02:00:37 OpenWrt user.info kernel: b43 ssb0:3: firmware: requesting b43/ucode13.fw
Jan 1 02:00:37 OpenWrt user.info kernel: b43 ssb0:3: firmware: requesting b43/lp0initvals13.fw
Jan 1 02:00:37 OpenWrt user.info kernel: b43 ssb0:3: firmware: requesting b43/lp0bsinitvals13.fw
Jan 1 02:00:37 OpenWrt user.info kernel: b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
Jan 1 02:00:43 OpenWrt user.info kernel: device wlan0 entered promiscuous mode
Jan 1 02:00:43 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Jan 1 02:00:46 OpenWrt user.info kernel: device wlan0 left promiscuous mode
Jan 1 02:00:46 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering disabled state
Jan 1 02:00:46 OpenWrt user.info kernel: device wlan0 entered promiscuous mode
Jan 1 02:00:46 OpenWrt user.info kernel: br-lan: port 2(wlan0) entering forwarding state
Jan 1 02:00:47 OpenWrt user.info sysinit: Loading defaults
Jan 1 02:00:48 OpenWrt user.info sysinit: Loading synflood protection
Jan 1 02:00:48 OpenWrt user.info sysinit: Adding custom chains
Jan 1 02:00:49 OpenWrt user.info sysinit: Loading zones
Jan 1 02:00:51 OpenWrt user.info sysinit: Loading forwarding
Jan 1 02:00:51 OpenWrt user.info sysinit: Loading redirects
Jan 1 02:00:51 OpenWrt user.info sysinit: Loading rules
Jan 1 02:00:51 OpenWrt user.info sysinit: Loading includes
Jan 1 02:00:51 OpenWrt user.info sysinit: Loading zone defaults
Jan 1 02:00:53 OpenWrt user.notice root: adding lan (br-lan) to firewall zone lan
Jan 1 02:00:53 OpenWrt cron.err crond[1015]: crond (busybox 1.14.4) started, log level 5
Jan 1 02:00:54 OpenWrt authpriv.info dropbear[1022]: Running in background
Jan 1 02:00:54 OpenWrt user.info sysinit: pppoe: ioctl(SIOCGIFHWADDR): No such device
Jan 1 02:00:54 OpenWrt daemon.err pppoe-relay[1033]: ioctl(SIOCGIFHWADDR): No such device
Jan 1 02:01:00 OpenWrt daemon.info dnsmasq[1120]: started, version 2.51 cachesize 150
Jan 1 02:01:00 OpenWrt daemon.info dnsmasq[1120]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Jan 1 02:01:00 OpenWrt daemon.info dnsmasq-dhcp[1120]: DHCP, IP range 192.168.1.100 -- 192.168.1.251, lease time 12h
Jan 1 02:01:00 OpenWrt daemon.info dnsmasq[1120]: using local addresses only for domain lan
Jan 1 02:01:00 OpenWrt daemon.warn dnsmasq[1120]: no servers found in /tmp/resolv.conf.auto, will retry
Jan 1 02:01:00 OpenWrt daemon.info dnsmasq[1120]: read /etc/hosts - 1 addresses
Jan 1 02:01:00 OpenWrt daemon.err dnsmasq-dhcp[1120]: failed to read /etc/ethers: No such file or directory
Jan 1 02:01:01 OpenWrt user.info sysinit: <<<< 3G interface found. Connect... >>>>
Jan 1 02:01:02 OpenWrt user.info sysinit: * usb_modeswitch: tool for controlling "flip flop" mode USB devices
Jan 1 02:01:02 OpenWrt user.info sysinit: * Version 0.9.7 (C) Josua Dietze 2009
Jan 1 02:01:02 OpenWrt user.info sysinit: * Works with libusb 0.1.12 and probably other versions
Jan 1 02:01:02 OpenWrt user.info sysinit: Looking for target devices ...
Jan 1 02:01:02 OpenWrt user.info sysinit: Found devices in target mode or class (1)
Jan 1 02:01:02 OpenWrt user.info sysinit: Looking for default devices ...
Jan 1 02:01:02 OpenWrt user.info sysinit: No default device found. Is it connected? Bye!
Jan 1 02:01:04 OpenWrt user.info kernel: usbcore: registered new interface driver cdc_acm
Jan 1 02:01:04 OpenWrt user.info kernel: cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
Jan 1 02:01:05 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial
Jan 1 02:01:05 OpenWrt user.info kernel: USB Serial support registered for generic
Jan 1 02:01:05 OpenWrt user.info kernel: usbserial_generic 1-1:1.0: generic converter detected
Jan 1 02:01:05 OpenWrt user.info kernel: usb 1-1: generic converter now attached to ttyUSB0
Jan 1 02:01:05 OpenWrt user.info kernel: usbserial_generic 1-1:1.1: generic converter detected
Jan 1 02:01:05 OpenWrt user.info kernel: usb 1-1: generic converter now attached to ttyUSB1
Jan 1 02:01:05 OpenWrt user.info kernel: usbserial_generic 1-1:1.2: generic converter detected
Jan 1 02:01:05 OpenWrt user.info kernel: usb 1-1: generic converter now attached to ttyUSB2
Jan 1 02:01:05 OpenWrt user.info kernel: usbcore: registered new interface driver usbserial_generic
Jan 1 02:01:05 OpenWrt user.info kernel: usbserial: USB Serial Driver core
Jan 1 02:01:11 OpenWrt daemon.notice pppd[1237]: pppd 2.4.4 started by root, uid 0
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: abort on (BUSY)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: abort on (NO CARRIER)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: abort on (ERROR)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: abort on (NO DIAL TONE)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: abort on (NO ANSWER)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: abort on (DELAYED)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: report (CONNECT)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: timeout set to 10 seconds
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: send (AT^M)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: expect (OK)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: AT^M^M
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: OK
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: -- got it
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: send (ATZ^M)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: timeout set to 30 seconds
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: expect (OK)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: ^M
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: ATZ^M^M
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: OK
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: -- got it
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: send (ATDT#777^M)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: expect (CONNECT)
Jan 1 02:01:12 OpenWrt local2.info chat[1270]: ^M
Jan 1 02:01:13 OpenWrt local2.err chat[1270]: SIGHUP
Jan 1 02:01:13 OpenWrt local2.err chat[1270]: Can't restore terminal parameters: Input/output error
Jan 1 02:01:21 OpenWrt daemon.notice pppd[1310]: pppd 2.4.4 started by root, uid 0
Jan 1 02:01:21 OpenWrt daemon.notice pppd[1310]: Removed stale lock on ttyUSB0 (pid 1237)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: abort on (BUSY)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: abort on (NO CARRIER)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: abort on (ERROR)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: abort on (NO DIAL TONE)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: abort on (NO ANSWER)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: abort on (DELAYED)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: report (CONNECT)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: timeout set to 10 seconds
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: send (AT^M)
Jan 1 02:01:22 OpenWrt local2.info chat[1314]: expect (OK)
Jan 1 02:01:25 OpenWrt local2.info chat[1314]: ~^?}#@!}!}#} }9}"}&} } } } }#}%B#}%}%}&S^@&^S}'}"}(}"c$~~^?}#@!}!}$} }9}"}&} } } } }
Jan 1 02:01:31 OpenWrt local2.info chat[1314]: #}%B#}%}%}&S^@&^S}'}"}(}".,~~^?}#@!}!}%} }9}"}&} } } } }#}%B#}%}%}&S^@&^S}'}"}(}"jw~~
Jan 1 02:01:32 OpenWrt local2.info chat[1314]: alarm
Jan 1 02:01:32 OpenWrt local2.info chat[1314]: Failed
Jan 1 02:01:32 OpenWrt daemon.err pppd[1310]: Connect script failed
Jan 1 02:01:41 OpenWrt user.info sysinit: insmod: can't insert 'usbserial': File exists
Jan 1 02:01:41 OpenWrt user.info kernel: USB Serial support registered for pl2303
Jan 1 02:01:41 OpenWrt user.info kernel: usbcore: registered new interface driver pl2303
Jan 1 02:01:41 OpenWrt user.info kernel: pl2303: Prolific PL2303 USB to serial adaptor driver
Jan 1 02:01:41 OpenWrt user.info kernel: USB Serial support registered for FTDI USB Serial Device
Jan 1 02:01:41 OpenWrt user.info kernel: usbcore: registered new interface driver ftdi_sio
Jan 1 02:01:41 OpenWrt user.info kernel: ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
Jan 1 02:01:42 OpenWrt user.info kernel: Initializing USB Mass Storage driver...
Jan 1 02:01:42 OpenWrt user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 02:01:42 OpenWrt user.info kernel: USB Mass Storage support registered.
Jan 1 02:01:44 OpenWrt user.info sysinit: Starting igmpproxy in normal mode
Jan 1 02:01:44 OpenWrt user.err igmpproxy[1361]: There must be at least 2 Vif's where one is upstream.
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: abort on (BUSY)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: abort on (NO CARRIER)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: abort on (ERROR)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: abort on (NO DIAL TONE)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: abort on (NO ANSWER)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: abort on (DELAYED)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: report (CONNECT)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: timeout set to 10 seconds
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: send (AT^M)
Jan 1 02:02:04 OpenWrt local2.info chat[1395]: expect (OK)
Jan 1 02:02:04 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Jan 1 02:02:10 OpenWrt local2.info chat[1395]: ~^?}#@!}!}!} }9}"}&} } } } }#}%B#}%}%}&^DU^Vs}'}"}(}"AQ~~^?}#@!}!}"} }9}"}&} } } } }
Jan 1 02:02:14 OpenWrt local2.info chat[1395]: alarm
Jan 1 02:02:14 OpenWrt local2.info chat[1395]: Failed
Jan 1 02:02:14 OpenWrt daemon.err pppd[1310]: Connect script failed
Jan 1 02:02:19 OpenWrt user.info sysinit: ping: sendto: Network is unreachable
Jan 1 02:02:21 OpenWrt daemon.info pppd[1310]: Terminating on signal 15
Jan 1 02:02:21 OpenWrt daemon.info pppd[1310]: Exit.
Jan 1 02:02:34 OpenWrt user.info sysinit: ping: sendto: Network is unreachable


Help! PLEASE!!!