DM800HD Clone Patched Images (Sim 2.01 SSL#84D OE2.0)

[halfhalf]

BlackHole.2.1.7.September.DM800HD.CLONE.SSL84D.SIM 2.OE2.0.bymarwen.07.09.2015

07/09/2015: New Enigma2 Compiled 07/09/2015

* BlackholeAddons: updated

* ADD New Patch for Teletext:
-Allow users to change key mapping via keymap.xml. As a result of it
volume and mute is working when teletext is visible
-Press Txt to open Teletext
-Press Menu to open Teletext Menu

* ADD Drivers for Usb keyboard: you can Plug your usb keyboard and Reboot dreambox
-kernel-module-usbhid
-kernel-module-usbserial

* ADD Arabic Language to VirtualKeyBoard

* ADD Azerty Keyboard

* Keyboard: use default.kmap by default

* Hotplug: updated

* InfobarPosition Fixed Crash: ADD Universe

* FixedMenu: Fix GS when trying to access a invalid Tuple

BlackHole.2.1.7. September DM800HD CLONE


DREAMBOX ALL IMAGES 2014 - 2015

[rik405]

Openpli 4 Gstreamer 1.6.2 работает все хорошо только HD на Iptv туго идет.

ПОСЛЕ ПРОШИВКИ НАКАТИТЬ sim201_ssl84D.nfi в архиве есть все. Без него не пробовал в падлу восстанавливать.

ИМИДЖ

Не забываем нажать кнопку спасибо!!

[halfhalf]

OpenPLi.4.0.Gstreamer1.7.0.DM800HD.CLONE.SSL84D.SI M2.OE2.0.byhoura.25.12.2015

Changes since previous release:


- mx3L's gstreamer revert which fixes mp4 playback from remote locations
- Spark drivers updated to 20151113
- Using aio-grab from oe-alliance which includes fixes for sprak receivers
- New Japhar IPTV List (thanks to ToySoft).
- Removed the linux 2.6.18 kernel patch for ignoring the vermagic as it might be the cause of some instabilities.


Changes compared to openpli-oe-core gst-1:


- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
By mx3L which fixes mp4 playback from remote locations.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cd[​IMG]tinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.


Known issues:


- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well

OpenPLi.4.0.Gstreamer1.7.0 DM800HD CLONE


DREAMBOX ALL IMAGES 2014 - 2015

[tar5805]

Если можно ссылку как сменит имидж спасибо... У меня симка 201 немогу поставить бекап с загрузчиком 84,что делаю не так

[halfhalf]

BlackHole.2.1.7.WilCard.DM800HD.CLONE.SSL84D.SIM2. OE2.0.bymarwen.09.01.2016

09/01/2016: * New skin_default: Darkstar

- Support Ecminfo for Emu Wicardd

* Blackhole font size is Skinnable

- ADD Current Value

* BlackholeAddons updated:

- ADD Reload Setting (Reload Channel Lists)
- Now BlackholeAddons is in MainMenu (Menu-BlackholeAddons)

BlackHole.2.1.7.WilCard DM800HD CLONE


DREAMBOX ALL IMAGES 2014 - 2015

[halfhalf]

OpenPLi.4.0.NewGstreamer1.7.1.DM800HD.CLONE.SSL84D .SIM2.OE2.0.06.01.2016

Changes since previous release:

- Gstreamer snapshot updated to 1.7.1:

* The mp4 issue when playing from remote locations has been fixed upstream,
so I've dropped the revert.

* Libsoup has been updated so I've dropped the revert for the
old libsoup as well.
- DM800Se V2 and DM500HD V2 kernel config has been
cleaned and more in sync with PLi's config for the other Dreambox models.

- More free space by adding a task before do_package_write_ipk which will upx compress some binaries.

* This should give us a few more MBs to work with (Dreambox *cough*).

- Major rework of the meta-fulan BSP for spark thanks to Tapaat for helping me out.

* Now using Tapaat's drivers which fixes the frambuffer (and 22khz?) issue.

* Enable of the zram module.

* Shipping his wifi drivers.

* VFD time is now synced every 5 minutes using a cron job.

* Software update and plugin-installation has been fixed.

* Using Tapaat's lirc config for spark and spark7162.
- The usual batch of dvbmediasink fixes by Christophecvr and mx3L:

* A brand new divx/xvid bitstream unpacker by mx3L should fix playback of avi files with wrong fourcc.

- Libsoup has been updated to 2.52 (from master-next).

- Refactor wifi drivers a bit on Linux 2.6.18,
not auto-loading the mt7600 anymore,
the correct driver should hopefully be loaded
when you plugin your wifi stick.

Changes compared to openpli-oe-core gst-1:

- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
- Every receiver uses christophecvr's multibox dvbmediasink.

- Libsoup has been updated to 2.52 (from master-next).
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers
(ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
Please use 'duckbox' instead.
- On Zgemma Star you cannot use full HD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

TODO:

- Linux 2.6.18: Create a plugin / ppanel to select which Realtek/Ralink driver to
load on startup (eg. rt3070, rt55xx, mt7600), since they cannot be loaded at the same time.

- Linux 2.6.18: Look into the v4l usb drivers.

- Add Spark specific plugins by gorski.

- Add meta-ini from OE-Alliance and shape it up for openpli-oe-core.

OpenPLi.4.0.NewGstreamer1.7.1 DM800HD CLONE


DREAMBOX ALL IMAGES 2014 - 2015

[halfhalf]

BlackHole.2.1.7.NewFix.DM800HD.CLONE.SSL84D.SIM2.O E2.0.bymarwen.21.01.2016

21/01/2016: * New Enigma2 Compiled

* Allow gstreamer to convert the audio when the dvbaudiosink doesn't
support the format

* servicemp3:

- follow GstBuffer API changes
- follow gstreamer api changes
- fix gstreamer assertions, iterating elements
- add sanitychecks on subtitle caps
- fix getting text-tags
- support text/x-raw subtitle caps

* servicedvb: allow timeshift to be started on an http ts stream

* Export timeshift helper functions

* channelselection:
From setup menu in channelselection go back to channelselection.
So you can toggle channelselectioncontextmenuCustomise
and configchannelselection

* Fix crash when writing epg cache to the disk:
Timestamp in contentTimeMap can differ from eventData timestamp.
In such cases eventData is not removed from timeMap. timeMap is
used in eEPGCache::save which accesses in such a case freed memory.
This can cause crash.

BlackHole.2.1.7.NewFix DM800HD CLONE


DREAMBOX ALL IMAGES 2014 - 2015

[halfhalf]

BlackHole.3.0.2C.DM800HD.CLONE.SSL84D.SIM2.OE2.0.b ymarwen.15.06.2016

15/06/2016: * StartWizard:Remove Parental Control from wizard

* Fix Mounting HDD and usb

* Add New arabic translation(ar.po)

* Fix Some Bugs(you can Now Test IptvPlayer)

BlackHole.3.0.2C DM800HD CLONE


DREAMBOX ALL IMAGES 2014 - 2015