Тем: 4,588, Сообщений: 361,004, Пользователи: 159,914
На форуме: 43
|
|
||||||
 |
|
|
Опции темы | Опции просмотра | Language |
|
|
04.08.2018, 19:52
|
#1 | |
|
Новичок
 
Регистрация: 16.07.2018
Ресивер: World Vision T62D
Сообщений: 17
Сказал(а) спасибо: 7
Поблагодарили 4 раз(а) в 3 сообщениях
Вес репутации: 0  |
Цитата:
Код:
X▒XRUN error : configure DAC must set ENABLE_GX_OTP = y ! Partition Version : 102 Partition Count : 6 Write Protect : TRUE CRC32 Enable : TRUE Table CRC32 : C958738A ============================================================================================== ID NAME FS CRC32 START TOTAL_SIZE MAIN_SIZE USED_SIZE Use% RES_SIZE ============================================================================================== 0 BOOT RAW 0C7B9D8F 00000000 64 KB 64 KB 63764 B 97% 0 MB 1 TABLE RAW 00010000 512 B 512 B 512 B 100% 0 MB 2 LOGO RAW AF694866 00010200 65024 B 65024 B 64632 B 99% 0 MB 3 KERNEL RAW C427C383 00020000 2560 KB 2560 KB 2532 KB 98% 0 MB 4 ROOT CRAMFS CD59C062 002a0000 832 KB 832 KB 812 KB 97% 0 MB 5 DATA MINIFS FF000000 00370000 576 KB 576 KB 1 B 0% 0 MB ---------------------------------------------------------------------------------------------- GxLoader v1.9.6-x 20170220 cpu family : CSKY chip model : gx6605s board type : 6605s memory size : 64 MB Flash type : gd25q32 Flash size : 4 MB warning: board-init not call function enable_dac, will open cvbs & ypbpr default. show jpeg logo ... romfs_load file ecos.bin.lzma. Decompress kernel ...ok The total boot time is: 5 s (5562 ms) cmdline str: mem. mem_info bank[0]start:90000000, size:1800000. mem_info bank[1]start:91800000, size:2800000. The whole mem size: 4000000. wdt_init, 6605. -----------[bsp_panel_mod_init] ret = 0---------- -----------[bsp_gpio_mod_init] ret = 0---------- jedec_id=c84016, ext_id=c840 ___usbwifi_init____ [cyg_net_init] Init: mbinit(0x0) [cyg_net_init] Init: cyg_net_init_devs(0x0) cyg_net_init_devs Init device 'ra0' ___rt_ecos_init____ cyg_net_init_devs Init device empty '0x90620558' cyg_net_init_devs Init device empty '0x90620568' [cyg_net_init] Init: loopattach(0x0) [cyg_net_init] Init: cyg_ppp_pppattach(0x0) [cyg_net_init] Init: ifinit(0x0) [cyg_net_init] Init: domaininit(0x0) [cyg_net_init] Init: cyg_net_add_domain(0x905f1b64) New domain internet at 0x0 [cyg_net_init] Init: cyg_net_add_domain(0x905f1814) New domain route at 0x0 [cyg_net_init] Init: call_route_init(0x0) [cyg_net_init] Done USB HCD: device gx-ehci, build at 10:12:02 Mar 19 2018 ehci: 0x907aa58c ehci->hcs_params=0x2112, num: 2 hcs_params=0x2112 flag=0x0. hub1=0x2000 hub2=0x2000 ehci base=0xa0900000 operational base= 0xa0900010 gx-ehci gx-ehci.0: gx EHCI gx-ehci gx-ehci.0: new USB bus registered, assigned bus number 1 ehci_mem_init():ehci->async->qh_dma=0x107b6ac0 ehci_mem_init():sizeof qtd: 96. ehci_mem_init():sizeof qh: 128. gx-ehci gx-ehci.0: supports USB remote wakeup gx-ehci gx-ehci.0: irq 59, io mem 0xa0900000 usb usb1: default language 0x0409 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-:1.0 (config #1, interface 0) hub 1-:1.0: usb_probe_interface hub 1-:1.0: usb_probe_interface - got id hub 1-:1.0: USB hub found hub 1-:1.0: 2 ports detected hub 1-:1.0: standalone hub hub 1-:1.0: individual port power switching hub 1-:1.0: individual port over-current protection hub 1-:1.0: Single TT hub 1-:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-:1.0: power on to power good time: 20ms hub 1-:1.0: local power source is good hub 1-:1.0: enabling power on all ports USB HCD: device gx-ohci, build at 10:12:03 Mar 19 2018 --------ohci base= 0xa0a00000 <7>: starting gx OHCI USB Controller no sem_wait. <7>: Clock to USB host has been enabled gx-ohci gx-ohci.0: gx OHCI gx-ohci gx-ohci.0: new USB bus registered, assigned bus number 2 gx-ohci gx-ohci.0: supports USB remote wakeup gx-ohci gx-ohci.0: irq 58, io mem 0xa0a00000 usb usb2: default language 0x0409 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-:1.0 (config #1, interface 0) hub 2-:1.0: usb_probe_interface hub 2-:1.0: usb_probe_interface - got id hub 2-:1.0: USB hub found hub 2-:1.0: 1 port detected hub 2-:1.0: standalone hub hub 2-:1.0: no power switching (usb 1.0) hub 2-:1.0: global over-current protection hub 2-:1.0: power on to power good time: 4ms hub 2-:1.0: local power source is good hub 2-:1.0: no over-current condition exists hub 2-:1.0: trying to enable port power on non-switchable hub --------ohci base= 0xa0b00000 <7>: starting gx OHCI USB Controller no sem_wait. <7>: Clock to USB host has been enabled gx-ohci gx-ohci.1: gx OHCI gx-ohci gx-ohci.1: new USB bus registered, assigned bus number 3 gx-ohci gx-ohci.1: supports USB remote wakeup gx-ohci gx-ohci.1: irq 57, io mem 0xa0b00000 usb usb3: default language 0x0409 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-:1.0 (config #1, interface 0) hub 3-:1.0: usb_probe_interface hub 3-:1.0: usb_probe_interface - got id hub 3-:1.0: USB hub found hub 3-:1.0: 1 port detected hub 3-:1.0: standalone hub hub 3-:1.0: no power switching (usb 1.0) hub 3-:1.0: global over-current protection hub 3-:1.0: power on to power good time: 4ms hub 3-:1.0: local power source is good hub 3-:1.0: no over-current condition exists hub 3-:1.0: trying to enable port power on non-switchable hub rtusb init rt5370 ---> rtusb init mt7601 ---> goxceed vserson v1.9.6-4+patch warning: want to protect len 0x370000; actually protect len 0x200000, please confirm. Flash write protect(BOTTOM): 0 - 200000 INFO: mount /dev/flash/0/0x2a0000,0xd0000, partition id = 4 usb_hcd_poll_rh_status, 531. usb_hcd_poll_rh_status, 531. usb_hcd_poll_rh_status, 531. MPEG: date 2016.11.04 ver 1.1.2.1 [FB]:start:0x91800000, size:0x2800000 app_mod_tuner_config_init 22 app_mod_tuner_config_init tuner_cfg = |10:0:0x80:81:0:0xc0:&1:1:0:0:0:0|11:0:0x80:82:0:0xc0:@1:1:0:0:0:0 app_mod_tuner_config_init 55 app_mod_tuner_config_init tuner_cfg = |10:0:0x80:81:0:0xc0:&1:1:0:0:0:0|11:0:0x80:82:0:0xc0:&1:1:0:0:0:0 app_mod_tuner_config_init error fe_profile.demod_type = 10 fe_profile.demod_i2c_id = 0 fe_profile.demod_chip_addr = 0x80 fe_profile.tuner_type = 97 fe_profile.tuner_i2c_id = 0 fe_profile.tuner_chip_addr = 0xc0 fe_profile.demod_type = 11 fe_profile.demod_i2c_id = 0 fe_profile.demod_chip_addr = 0x80 fe_profile.tuner_type = 98 fe_profile.tuner_i2c_id = 0 fe_profile.tuner_chip_addr = 0xc0 gx_frontend_initfe_profile->demod_type = 10 DVB: initialising frontend (Nationalchip atbm78x DVB-T2)... TunerAuto_Detect[188] , 2 it is mxl608 TunerAuto_init = 0x907dd5a0 gTuner_type =81 TunerAuto_init = TUNER_MXL608 -----------xtalCfg.xtalCap =10 --------------------------------MXL608_tuner_init success___full ==============init demod and tuner=========== gx_frontend_initfe_profile->demod_type = 11 parallel_mode = 1 DVB: initialising frontend (Nationalchip atbm78x DVB-C)... TunerAuto_c_init gTuner_type= 81 TunerAuto_Detect[188] , 2 it is mxl608 MXL608_tuner_init_DVBC ok ==============init demod and tuner=========== success full frontend_mod_init_atbm78x app_get_country_type 47 s_country = Russia ======initial_rfchannels:(country:13) 50.5-866.0======== [1073714067 ]power up from power off, board_type=0,led_converse=0,lock_led=3,standby_led=2, [ ]power up switchon auto standby!!! [NIM] ERROR!!! NIM is NULL,please init NIM! [NIM] ERROR!!! NIM is NULL,please init NIM! TunerAuto_sleep ATBM78xSusPend ####[_get_lowpower_cmdline]416 cmd: keys=0x7f35 powercut=10,0 powerkey=0x47#### will enter gxlowpower:WakeTime=0x0,GpioMask=0x0,GpioData=0x0,key=0x0,cmdline=keys=0x7f35 powercut=10,0 powerkey=0x47 _sram_lowpower_end :0x102148 The frequency of the AHB is the same as the crystal's now. Close the PLL. Current Time = 0x0 powercut set phy gpio 0x0 to 0x0 ! query [key/waketime/gpio] to reset... The powerkey of panel is received to reset. WDT will reset the system now. X▒XRUN error : configure DAC must set ENABLE_GX_OTP = y ! Partition Version : 102 Partition Count : 6 Write Protect : TRUE CRC32 Enable : TRUE Table CRC32 : C958738A ============================================================================================== ID NAME FS CRC32 START TOTAL_SIZE MAIN_SIZE USED_SIZE Use% RES_SIZE ============================================================================================== 0 BOOT RAW 0C7B9D8F 00000000 64 KB 64 KB 63764 B 97% 0 MB 1 TABLE RAW 00010000 512 B 512 B 512 B 100% 0 MB 2 LOGO RAW AF694866 00010200 65024 B 65024 B 64632 B 99% 0 MB 3 KERNEL RAW C427C383 00020000 2560 KB 2560 KB 2532 KB 98% 0 MB 4 ROOT CRAMFS CD59C062 002a0000 832 KB 832 KB 812 KB 97% 0 MB 5 DATA MINIFS FF000000 00370000 576 KB 576 KB 1 B 0% 0 MB ---------------------------------------------------------------------------------------------- GxLoader v1.9.6-x 20170220 cpu family : CSKY chip model : gx6605s board type : 6605s memory size : 64 MB Flash type : gd25q32 Flash size : 4 MB warning: board-init not call function enable_dac, will open cvbs & ypbpr default. show jpeg logo ... romfs_load file ecos.bin.lzma. Decompress kernel ...ok The total boot time is: 5 s (5562 ms) cmdline str: mem. mem_info bank[0]start:90000000, size:1800000. mem_info bank[1]start:91800000, size:2800000. The whole mem size: 4000000. wdt_init, 6605. -----------[bsp_panel_mod_init] ret = 0---------- -----------[bsp_gpio_mod_init] ret = 0---------- jedec_id=c84016, ext_id=c840 ___usbwifi_init____ [cyg_net_init] Init: mbinit(0x0) [cyg_net_init] Init: cyg_net_init_devs(0x0) cyg_net_init_devs Init device 'ra0' ___rt_ecos_init____ cyg_net_init_devs Init device empty '0x90620558' cyg_net_init_devs Init device empty '0x90620568' [cyg_net_init] Init: loopattach(0x0) [cyg_net_init] Init: cyg_ppp_pppattach(0x0) [cyg_net_init] Init: ifinit(0x0) [cyg_net_init] Init: domaininit(0x0) [cyg_net_init] Init: cyg_net_add_domain(0x905f1b64) New domain internet at 0x0 [cyg_net_init] Init: cyg_net_add_domain(0x905f1814) New domain route at 0x0 [cyg_net_init] Init: call_route_init(0x0) [cyg_net_init] Done USB HCD: device gx-ehci, build at 10:12:02 Mar 19 2018 ehci: 0x907aa58c ehci->hcs_params=0x2112, num: 2 hcs_params=0x2112 flag=0x0. hub1=0x2000 hub2=0x2000 ehci base=0xa0900000 operational base= 0xa0900010 gx-ehci gx-ehci.0: gx EHCI gx-ehci gx-ehci.0: new USB bus registered, assigned bus number 1 ehci_mem_init():ehci->async->qh_dma=0x107b6ac0 ehci_mem_init():sizeof qtd: 96. ehci_mem_init():sizeof qh: 128. gx-ehci gx-ehci.0: supports USB remote wakeup gx-ehci gx-ehci.0: irq 59, io mem 0xa0900000 usb usb1: default language 0x0409 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-:1.0 (config #1, interface 0) hub 1-:1.0: usb_probe_interface hub 1-:1.0: usb_probe_interface - got id hub 1-:1.0: USB hub found hub 1-:1.0: 2 ports detected hub 1-:1.0: standalone hub hub 1-:1.0: individual port power switching hub 1-:1.0: individual port over-current protection hub 1-:1.0: Single TT hub 1-:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-:1.0: power on to power good time: 20ms hub 1-:1.0: local power source is good hub 1-:1.0: enabling power on all ports USB HCD: device gx-ohci, build at 10:12:03 Mar 19 2018 --------ohci base= 0xa0a00000 <7>: starting gx OHCI USB Controller no sem_wait. <7>: Clock to USB host has been enabled gx-ohci gx-ohci.0: gx OHCI gx-ohci gx-ohci.0: new USB bus registered, assigned bus number 2 gx-ohci gx-ohci.0: supports USB remote wakeup gx-ohci gx-ohci.0: irq 58, io mem 0xa0a00000 usb usb2: default language 0x0409 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-:1.0 (config #1, interface 0) hub 2-:1.0: usb_probe_interface hub 2-:1.0: usb_probe_interface - got id hub 2-:1.0: USB hub found hub 2-:1.0: 1 port detected hub 2-:1.0: standalone hub hub 2-:1.0: no power switching (usb 1.0) hub 2-:1.0: global over-current protection hub 2-:1.0: power on to power good time: 4ms hub 2-:1.0: local power source is good hub 2-:1.0: no over-current condition exists hub 2-:1.0: trying to enable port power on non-switchable hub --------ohci base= 0xa0b00000 <7>: starting gx OHCI USB Controller no sem_wait. <7>: Clock to USB host has been enabled gx-ohci gx-ohci.1: gx OHCI gx-ohci gx-ohci.1: new USB bus registered, assigned bus number 3 gx-ohci gx-ohci.1: supports USB remote wakeup gx-ohci gx-ohci.1: irq 57, io mem 0xa0b00000 usb usb3: default language 0x0409 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-:1.0 (config #1, interface 0) hub 3-:1.0: usb_probe_interface hub 3-:1.0: usb_probe_interface - got id hub 3-:1.0: USB hub found hub 3-:1.0: 1 port detected hub 3-:1.0: standalone hub hub 3-:1.0: no power switching (usb 1.0) hub 3-:1.0: global over-current protection hub 3-:1.0: power on to power good time: 4ms hub 3-:1.0: local power source is good hub 3-:1.0: no over-current condition exists hub 3-:1.0: trying to enable port power on non-switchable hub rtusb init rt5370 ---> rtusb init mt7601 ---> goxceed vserson v1.9.6-4+patch warning: want to protect len 0x370000; actually protect len 0x200000, please confirm. Flash write protect(BOTTOM): 0 - 200000 INFO: mount /dev/flash/0/0x2a0000,0xd0000, partition id = 4 usb_hcd_poll_rh_status, 531. usb_hcd_poll_rh_status, 531. usb_hcd_poll_rh_status, 531. MPEG: date 2016.11.04 ver 1.1.2.1 [FB]:start:0x91800000, size:0x2800000 app_mod_tuner_config_init 22 app_mod_tuner_config_init tuner_cfg = |10:0:0x80:81:0:0xc0:&1:1:0:0:0:0|11:0:0x80:82:0:0xc0:@1:1:0:0:0:0 app_mod_tuner_config_init 55 app_mod_tuner_config_init tuner_cfg = |10:0:0x80:81:0:0xc0:&1:1:0:0:0:0|11:0:0x80:82:0:0xc0:&1:1:0:0:0:0 app_mod_tuner_config_init error fe_profile.demod_type = 10 fe_profile.demod_i2c_id = 0 fe_profile.demod_chip_addr = 0x80 fe_profile.tuner_type = 97 fe_profile.tuner_i2c_id = 0 fe_profile.tuner_chip_addr = 0xc0 fe_profile.demod_type = 11 fe_profile.demod_i2c_id = 0 fe_profile.demod_chip_addr = 0x80 fe_profile.tuner_type = 98 fe_profile.tuner_i2c_id = 0 fe_profile.tuner_chip_addr = 0xc0 gx_frontend_initfe_profile->demod_type = 10 DVB: initialising frontend (Nationalchip atbm78x DVB-T2)... TunerAuto_Detect[188] , 2 it is mxl608 TunerAuto_init = 0x907dd5a0 gTuner_type =81 TunerAuto_init = TUNER_MXL608 -----------xtalCfg.xtalCap =10 --------------------------------MXL608_tuner_init success___full ==============init demod and tuner=========== gx_frontend_initfe_profile->demod_type = 11 parallel_mode = 1 DVB: initialising frontend (Nationalchip atbm78x DVB-C)... TunerAuto_c_init gTuner_type= 81 TunerAuto_Detect[188] , 2 it is mxl608 MXL608_tuner_init_DVBC ok ==============init demod and tuner=========== success full frontend_mod_init_atbm78x app_get_country_type 47 s_country = Russia ======initial_rfchannels:(country:13) 50.5-866.0======== [aabbccdd]power up from standby donothing board_type=0,led_converse=0,lock_led=3,standby_led=2, ioctl_show_brigthness brigthness = 0 panel_brigthness =1041 [GXCA] I_OEM don't exist! [GXCA] V_OEM don't exist! [FB]:start:0x11800000, size:0x2800000 framebuffer phys = 91800000, mmap = 0x91800000, size = 41943040, mgr = 0x91800000 hub_events enter... hub 1-:1.0: state 7 ports 2 chg 0000 evt 0004 hub 1-:1.0: after hub_port_connect_change hub 1-:1.0: port 2, status 0501, change 0001, 480 Mb/s hub 1-:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 usb 1-2: new high speed USB device using gx-ehci and address 2 [GUI]widget_new_child(default_text, TEXT) = NULL [GUI]widget_new_child(text_style_1, TEXT) = NULL [GUI]widget_new_child(text_style_2, TEXT) = NULL [GUI]style num: 10 [XML] Parse: 1410 ms, total 3330 ms usb 1-2: config 1 interface 0 altsetting 0 has 7 endpoint descriptors, different from the interface descriptor's value: 5 usb 1-2: default language 0x0409 usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-2: usb_probe_device usb 1-2: configuration #1 chosen from 1 choice usb 1-2: adding 1-2:1.0 (config #1, interface 0) rt5370 1-2:1.0: usb_probe_interface rt5370 1-2:1.0: usb_probe_interface - got id _____rtusb_probe:185_______ _____rtusb_probe:214_______post detect sem [GXRT5370_RtmpOSTaskAttach:693]taskName = RtmpTimerTask taskSize = 65536 [GXRT5370_RtmpOSTaskAttach:693]taskName = RtmpMlmeTask taskSize = 65536 [GXRT5370_RtmpOSTaskAttach:693]taskName = RtmpCmdQTask taskSize = 65536 tdt create subt ok tdt create subt ok can not get PM node by id! nodeGet->node_type = 1 [app_prepare_for_play]>> Start tuner0 monitor! [app_prepare_for_play]>> Stop tuner1 monitor! ================T2/C EPG CLEAN================ set unlock err app set mode = 2 GxFrontend_SetTp params.frequency =498000000 data_plp_id=0x0 -----[0]---set tp, frequency = 498000, symbol_rate = 0, voltage = 0, sat22k = 0-------- _____RT5370 WiFi Init Done rtusb_probe <=== hub 1-:1.0: after hub_port_connect_change hub 2-:1.0: state 7 ports 1 chg 0000 evt 0000 hub 2-:1.0: after hub_port_connect_change hub 3-:1.0: state 7 ports 1 chg 0000 evt 0000 hub 3-:1.0: after hub_port_connect_change hub_events exit. hub_events enter... hub_events exit. hub_events enter... hub_events exit. hub_events enter... hub_events exit. @@@@@@@@@@ >> wifi status : 0 init status : -1 hotplug : -1 bandwidth = 0. TunerAuto_set_params TUNER_MXL608 freq=498000000 bandwith=0 @@@@@@@@@@ >> wifi status : 0 init status : 1 hotplug : -1 Tuner locked ~_~[module/app_play_control.c] app_normal_play, 1087, url = dvbt2://fre:498000&bandwidth:0&workmode:2&vpid:2101&apid:2102&pcrpid:2101&vcodec:2&acodec:0&tuner:0&scramble:0&pmt:2100&data_plp_id:0&common_plp_exist:0&common_plp_id:0&tsid:1&dmxid:0&progid:10~_~ =====> demux_parse_url 120 audio sync 1 =====> demux_parse_url 131 video sync 1 GxFrontend_SetTp params.frequency =498000000 data_plp_id=0x0 [USBWIFI HOTPLUG] PLUG_IN: 0 USB WIFI Hotplug in!! @@@@@@@@@@ >> wifi status : 0 init status : 1 hotplug : 1 [AUTO_TEST/RESET]------[stb freq locked!!!] =====> demux_parse_url 120 audio sync 1 =====> demux_parse_url 131 video sync 1 [AV-SYNC] : SYNC_MODE_NORMAL [AV-MSC] : more then 100 persent drop hdmi out data 1, source 0, edid codes: 0 spdif out data 1, source 0 VPU_GetVersionInfo(): 16093010 [GUI] ######## widget : wnd_full_screen ###### signal : app_full_screen_create excute too long ######## [GUI_Init] Success [Frontend-0]: TS Locked!... sssssapp_init line 632 [APP INIT]: 6070 ms, total 7620 ms start_time= 0 time_current= 978307200 =duration=0================zzy [driver][video][error] cost 0 size data decoded one frame,emb:1620 NET, GET MAC = [ra0]Name : 11111111 MAC : 38:d5:47:83:ed:21 PSK : 11111111 iwpriv ra0 set SiteSurvey app_pmt_get ver orgi: 255 cur: 17 app_pmt_get ver orgi: 17 cur: 17 ==========>Render Video time: 8 s, 670000 us ==========>Swtich Video interval: 8.670 s ==========>Swtich Video (min, max, avg, count) = (50.000 s, 0.000 s, 0.000 s, 0) start_time= 0 time_current= 1533400631 =duration=0================zzy Can not get fps by pts! iwpriv ra0 GetSiteSurvey Ch SSID BSSID Security Siganl(%)W-Mode ExtCH NT 1 MGTS_1222997 00:18:84:42:52:b7 WPAPSK/TKIPAES 26 11b/g/n NONE In 1 FON_FREE_ssid 00:18:84:42:52:b4 NONE 26 11b/g/n NONE In 1 DIR-620 c4:a8:1d:66:89:bc NONE 13 11b/g/n NONE In 1 RT-WiFi-5D1D 64:6e:ea:c4:5d:1b WPA1PSKWPA2PSK/TKIPAES 23 11b/g/n NONE In 4 mgts248 54:51:1b:43:17:30 WPA1PSKWPA2PSK/TKIPAES 68 11b/g/n NONE In 5 Mgts501 38:4c:4f:6c:10:0c WPA1PSKWPA2PSK/TKIPAES 18 11b/g/n NONE In 7 Beeline_2G_FF2358 94:4a:0c:4e:de:9b WPA1PSKWPA2PSK/TKIPAES 0 11b/g/n BELOW In 9 mgts1505 38:d5:47:83:ed:20 WPA2PSK/AES 89 11b/g/n NONE In 9 mgts1505 38:d5:47:83:ed:21 WPA1PSKWPA2PSK/AES 89 11b/g/n NONE In 10 MGTS_GPON_5351 00:0e:8f:08:ba:68 WPA2PSK/AES 0 11b/g/n NONE In 11 MGTS_GPON_5345 00:0e:8f:08:ba:4a WPA2PSK/AES 18 11b/g/n NONE In 12 shunkinet 50:0f:f5:89:e0:c1 WPA1PSKWPA2PSK/AES 68 11b/g/n BELOW In 13 ASUS-505 9c:5c:8e:c6:42:54 WPA2PSK/AES 13 11b/g/n NONE In 13 White-Bears 70:4d:7b:50:0a:0c WPA2PSK/AES 0 11b/g/n NONE In 1 MGTS_GPON_6192 d4:60:e3:21:83:7a WPA2PSK/AES 73 11b/g/n NONE In iwpriv ra0 set NetworkType=Infra encryption : 0x604 iwpriv ra0 set AuthMode=WPA2PSK iwpriv ra0 set EncrypType=AES iwpriv ra0 set WPAPSK=11111111 iwpriv ra0 set SSID=11111111 set wifi status = 0 !! [RT5370]CNTL - Association successful on BSS #0 @@@@@@@@@@ >> wifi status : 3 init status : 1 hotplug : 1 SIOCDIFADDR error ! Do DHCP ... !!! [WAIT SEM]______tdhcp_lease_______ ra0: Initializing device to use DHCP. ra0: Configured by DHCP, IP address 192.168.1.27, Gateway address 192.168.1.1, lease expiry: 1d 0h 0m 0s. Netmask address 255.255.255.0 Route - server: 192.168.1.1 Route - server: 0.0.0.0 ra0: Interface ready mac address: 00:87:24:40:28:bb IP address: 192.168.1.27 Netmask address: 255.255.255.0 Gateway: 192.168.1.1 Route - server: 192.168.1.1 Route - server: 0.0.0.0 ~~~~~~[AppNetworkServiceConsole]4945, ra0 connect!!!!! ~~~~~~[AppNetworkServiceConsole]4918, ra0 ok!!!!! ~~~~~~[AppNetworkServiceConsole]4929, s_global_net_state up!!!!! 04-08-2018 16:37:19 Time set from ntp1.vniiftri.ru [89.109.251.21].==========>Keypress time: 32 s, 360000 us key = 0x2 ==========>Keypress time: 43 s, 980000 us key = 0x7f45 the array have already freed stream type = 0 current play num = 19 ==========>Keypress time: 46 s, 910000 us key = 0x7f4d ==========>Keypress time: 47 s, 840000 us key = 0x7f4d ==========>Keypress time: 49 s, 30000 us key = 0x7f65 ==========>Keypress time: 50 s, 100000 us key = 0x7f45 now the play count = 19 oooooooooooooooooooooo start to play num:0 [app_prepare_for_play]>> Start tuner0 monitor! [app_prepare_for_play]>> Stop tuner1 monitor! ================T2/C EPG CLEAN================ set unlock err app set mode = 2 ~_~[module/app_play_control.c] app_normal_play, 1087, url = dvbt2://fre:546000&bandwidth:0&workmode:2&vpid:1011&apid:1012&pcrpid:1011&vcodec:2&acodec:0&tuner:0&scramble:0&pmt:1010&data_plp_id:0&common_plp_exist:0&common_plp_id:0&tsid:1&dmxid:0&progid:13~_~ set unlock err GxFrontend_SetTp params.frequency =546000000 data_plp_id=0x0 =====> demux_parse_url 120 audio sync 1 =====> demux_parse_url 131 video sync 1 VPU_DecClose: success [AV-SYNC] : SYNC_MODE_NORMAL [AV-MSC] : more then 100 persent drop hdmi out data 1, source 0, edid codes: 0 spdif out data 1, source 0 VPU_GetVersionInfo(): 16093010 bandwidth = 0. TunerAuto_set_params TUNER_MXL608 freq=546000000 bandwith=0 Tuner locked [AUTO_TEST/RESET]------[stb freq locked!!!] app_pmt_get ver orgi: 255 cur: 2 app_pmt_get ver orgi: 2 cur: 2 ==========>Render Video time: 53 s, 390000 us ==========>Swtich Video interval: 3.290 s ==========>Swtich Video (min, max, avg, count) = (3.290 s, 3.290 s, 3.290 s, 1) ==========>Keypress time: 55 s, 910000 us key = 0x7f45 now the play count = 0 ==========end the channel list start_time= 1533395700 time_current= 1533400678 =duration=5700================zzy start_time= 1533395700 time_current= 1533400678 =duration=5700================zzy start_time= 1533395700 time_current= 1533400681 =duration=5700================zzy ==========>Keypress time: 118 s, 700000 us key = 0x7f75 VPU_DecClose: success [app_prepare_for_play]>> Start tuner0 monitor! [app_prepare_for_play]>> Stop tuner1 monitor! ================T2/C EPG CLEAN================ set unlock err app set mode = 2 *****epg manage error***** /home/share/gx3235s_t2_worldvision_20171214/platform/gxbus/epg_db/gxepg_manage.c:GxBus_EpgClean:1165 ERR---epg not lock! ~~~~~epg manage error~~~~~ ~_~[module/app_play_control.c] app_normal_play, 1087, url = dvbt2://fre:546000&bandwidth:0&workmode:2&vpid:0&apid:1132&pcrpid:1132&vcodec:0&acodec:0&tuner:0&scramble:0&pmt:1130&data_plp_id:1&common_plp_exist:0&common_plp_id:1&tsid:1&dmxid:0&progid:22~_~ =====> demux_parse_url 120 audio sync 0 set unlock err GxFrontend_SetTp params.frequency =546000000 data_plp_id=0x1 =====> demux_parse_url 120 audio sync 0 hdmi out data 1, source 0, edid codes: 0 spdif out data 1, source 0 bandwidth = 0. TunerAuto_set_params TUNER_MXL608 freq=546000000 bandwith=0 Tuner locked ======= IPTC data: ======= City : City : Record vers. : 0 not unlink [GUI] ######## widget : wnd_full_screen ###### signal : app_full_screen_keypress excute too long ######## [AUTO_TEST/RESET]------[stb freq locked!!!] app_pmt_get ver orgi: 255 cur: 1 app_pmt_get ver orgi: 1 cur: 1 ==========>Keypress time: 123 s, 770000 us key = 0x7f75 app_iptv_list_download http://webhalpme.ru/iptvforever.m3u sucessed start to write file /mnt/des.m3u size =47625 start to gxapps_curl_free start to m3u_convert_xml start to app_iptv_api_get_server_list [GUI][SIG] cant find signal ( app_iptv_play_cursor_keypress )'s app function [_iptv_play_status]571 PLAYER_STATUS_PLAY_START Demuxer Type From HTTP File,(3) [AV-SYNC] : SYNC_MODE_NORMAL [AV-MSC] : more then 100 persent drop hdmi out data 1, source 0, edid codes: 0 spdif out data 1, source 0 VPU_GetVersionInfo(): 16093010 [_iptv_play_status]567 PLAYER_STATUS_PLAY_RUNNING длинна файла - 64632 B: Код:
2 LOGO RAW AF694866 00010200 65024 B 65024 B 64632 B |
